DRKRW-300AT-3 HDT VICAT Tester
Short Description:
DRKRW-300AT-3 HDT VICAT Tester Summary Mainly used for measuring the thermal deformation temperature and Vicat softening point temperature of non-metallic materials such as plastics, hard rubber, nylon, electrical insulation materials, long fiber reinforced composite materials, high-strength thermosetting laminated materials, etc. Easy to operate and precisely controlled, it is a highly intelligent testing instrument widely used in colleges, research institutions, and product quality s...
DRKRW-300AT-3 HDT VICAT Tester
Summary
Mainly used for measuring the thermal deformation temperature and Vicat softening point temperature of non-metallic materials such as plastics, hard rubber, nylon, electrical insulation materials, long fiber reinforced composite materials, high-strength thermosetting laminated materials, etc. Easy to operate and precisely controlled, it is a highly intelligent testing instrument widely used in colleges, research institutions, and product quality supervision and inspection units.
Testing standards
Meet the requirements of GB/T 1633, GB/T 8802, GB/T 1634, ISO 2507, ISO 75, ISO 306, ASTMD 1525, ASTMD 648 and other standards.
Instrument characteristics
Multiple security protection:
Mechanical temperature upper limit protection switch and software temperature upper limit protection ensure safe and stable operation of the test.
High precision measurement and control system:
High performance temperature sensors and advanced capacitive grid digital display percentage meters are used to accurately measure small changes in the sample. Advanced PID algorithm and full photoelectric isolation phase modulation module are used for temperature control, ensuring that the temperature rise rate error is less than 0.5 ℃.
Technical parameter
1) Temperature control range: room temperature~300 ℃
2) Maximum temperature error: ± 0.5 ℃ (50 degree heating rate) ± 1 ℃ (120 degree heating rate)
3) Heating rate: 50 ℃/h, 120 ℃/h
4) Temperature measurement points: 15) Number of test stands: 3
6) Deformation measurement range: 0-10mm
7) Maximum deformation error: ± 0.01mm
9) Sample support span: 64mm, 100mm
10) The sample holder is automatically lifted and lowered, and the thermal expansion coefficient of the sample holder itself is less than 0.005/100 ℃ (key point, directly affecting the experimental results)
11) Medium used: methylsilicone oil or transformer oil;
12) Cooling method: Natural cooling above 150 ℃, cooling with water at 150 ℃ or natural cooling.
13) External dimensions: 800 * 600 * 800mm; Weight: 70kg
Configuration Checklist:
|
Item |
Quantity |
|
Main engine |
1 set |
|
Sample holder |
3 pcs |
|
Hot deformation head |
3 pcs |
|
Vicat pressure needle |
3 pcs |
|
Power cord |
1 root |
|
Weights |
1 set |
|
Digital dial indicator with a range of 0-10mm |
3 pcs |
