C0041 - COFriction Tester

Luv hauj lwm:

This extremely easy to use instrument has been manufactured to determinethe static and kinetic friction of plastic film, sheeting and paper and other sheeted material using the horizontal plane principle. The coefficient of friction (COF)is anumber which represents the frictionbetween two surfaces. Friction is aresisting force relating to molecularstructure of a surface of one materialas it slides over the surface of thesame or another material. Moleculesfrom one surface link with molecules f...


  • FOB Nqe: US $ 0.5 - 9.999 / Daim
  • Min.Order Quantity: 100 Daim / Daim
  • Mov Muaj peev xwm: 10000 Daim / Daim ib lub hli
  • Chaw nres nkoj: Shenzhen
  • Ntsiab lus uas them: L / C, D / A, D / P, T / T
  • khoom Nthuav dav

    khoom cim npe

    This extremely easy to use instrument has been manufactured to determinethe static

    and kinetic friction of plastic film, sheeting and paper and other sheeted material using

    the horizontal plane principle.

    The coefficient of friction (COF)is anumber which represents the frictionbetween two

    surfaces. Friction is aresisting force relating to molecularstructure of a surface of one

    materialas it slides over the surface of thesame or another material. Moleculesfrom one

    surface link with molecules from the other. If you press the objects together more tightly,

    you push the surfaces closer together, joining more molecules. This is why friction is

    proportional to the normal force, how tightly the surfaces have to push on each other

    kom los ntawm rhuav. Qhov no kev faib ua feem yog cov coefficient ntawm tsis sib haum xeeb.

    The C.O.Friction Tester can measure Static COF from a resting position and continue to move

    kuaj tej chaw nyob rau hauv ib tug txheeb ze tsab ntawv tsa suab kom muab ib qho tseeb kinetic COF tshwm sim.

    The C.O.Friction Tester employs a moving sled with a stationary table. The table has a clamping

    system preventing slippage of the test piece during a test. The sled is lowered onto the table

    by means of an elevator system, which places the sled so as both test surfaces meet

    simultaneously,xa tej neeg teb xov tooj yuam kev, uas tej zaum yuav cuam tshuam tau ntawm qhov kev xeem.

    Different COF results in paper can be influenced by antiskid agents, relative humidity and

    calendering.The accurate COF data obtained by using the C.O.Friction Tester aids in assessing

    problem situations such as:

    Roll winding problems. E.g.: crepe wrinkles, dishing, telescoping.
    Web tracking problems and print misregister.
    No feed or multiple feed during sheet feeding. E.g.: printing, envelopes or cartons.
    Registration errors in diecutting or converting.
    Corrugator runnability problems of several kinds.
    Sliding on conveyor when product should not, or vice versa.

    Stack or Pallet stability. e.g.: cartons, sheets, sacks, printed material.

     

    Kev pab cuam:
    Designed specifically for friction measurement.
    Provides the user a means of determining the key COF parameters for their product.
    Useful for quality control.
    Precise and repeatable tests.
    Able to test and inspect incoming materials.
    Conforms to ISO 15359
    Extremely easy to operate.

    Lag luam:
    The C.O.Friction Tester Windows based software
    tso cai rau lub teb xov tooj mus teem xeem tsis xws li:
    Number of Repeats
    Number of Slides
    Acceleration of Sled
    Sled Weight
    Maximum Speed
    Force Delay

    By default, if the operator does not choose to select or adjust any test parameters,the

    system will automatically load parameters specified by ISO15359.The operator also has

    the opportunity of recording Sample Identification, where data suchasOperator Name,

    Description, Part Number, Standard, Date and Place can be recorded with theCOF results

    for future reference. Once all relevant data has been selected and recorded, the simple

    process of loading the sample ready for testing is achieved with the easy clamping system

    and sled carriage. With point and click mouse control, OK will initiate the drive mechanism,

    starting the test operation.

    The software package is user friendly, prompting the operator through all processes, including

    Accepting or Declining each individual test. This allows for any errors, such as a faulty sample,

    yuav tsum tau deleted thiab tsis sau tseg raws li ib feem ntawm zaum kawg tshwm sim. Tsis muaj ib tug swb thaum lub sij hawm ib lub voj voog ntawm t

    ests will not alter the sample number. Upon completion of a test cycle, involving the recording
    COF of selected test runs, a force time graph is displayed. The X and Y axis of the graph can

    Mekas rau qhov kev xeem raug pom zoo.

     

    Besides the graph, there are two other panels containing real-time data, the output panel

    and the COF panel. The test results panel shows the results accumulated during each repeat

    and is updated at the end of each slide. A statistics panel shows the means of both static

    and kinetic forces, both frictional and coefficient of friction.

     

    Specifications:
    Horizontal Table: 200mm x 500mm s/s flat top
    nto nrog ib taag clamp los mus tiv thaiv slippage ntawm cov qauv
    Sled: 60 x 60mm +/- 0.1mm
    Sled Weight: 800g +/- 5g
    Load Cell: 5lb (2.5kg)
    Drive Mechanism: Close loop servo
    Adjustable Pause Time after sled placement
    Display of COF: Real Time Graph

    Nta:
    Operator adjustable testing parameters
    Operator promoting program for ease of use
    Variable Speed Drive
    Unit Selection
    Data viewable after each cycle and or slide
    Data storage in common file format
    COF Curves are plotted in real time

    Options:
    Sleds:
    62.5 x 62.5mm for ASTM 3247
    63.5 x 63.5mm forT 816pm-92 ,T 549pm-90
    thiab ASTM ANSI / ASTM D xyoo 1894
    15 x 75mm for DIN 6729
    63 x 63mm for DIN 53375 and ISO 8295
    Peel khoom:
    For ASTM D3330

    Laub Carriage:
    Kinetic average.
    Peak force value.
    Printable results.
    Suitable to a range of products
    Easy to Operate Windows based Universal Testing Program.
    Designed specifically for friction testing

    Standards:
    ISO 15359
    ASTM 3247
    ASTM ANSI / ASTM D 1894
    DIN 6729
    DIN 53375
    ISO 8295
    T 816pm-92
    T 549pm-90

    Txuas:
    Electrical: 220/240 VAC @ 50 HZ or
    Electrical: 110 VAC @ 60 HZ
    (thov qhia kom meej thaum ordering)

    Qhov ntev:
    H: 300mm
    W: 650mm
    D: 450mm
    Weight: 15kg


  • Yav dhau los:
  • Tom ntej:

  • Related cov khoom siv

    WhatsApp Online Chat !