F0007-D - فیبرک عمودی ٹیسٹر جلا

مختصر کوائف:

The Fabric Vertical Burn Tester measures the limited flame spread properties of vertically oriented textile fabrics and industrial products in the form of a single or multi component fabrics, when subjected to a small defined flame. A textile is held vertically in a frame. A small flame is used to ignite the specimen and the time is measured for the flame to spread up the specimen, as well as after-flame time and afterglow time. This method is not.   The instrument operates by applying ...


  • ایف او بی قیمت: امریکہ $ 0.5 - 9،999 / ٹکڑا
  • Min.Order مقدار: 100 ٹکڑا / ٹکڑے
  • سپلائی کرنے کی صلاحیت: 10000 ٹکڑا فی مہینہ / ٹکڑے
  • پورٹ: شینزین
  • ادائیگی کی شرائط: L / C، D / A، D / P، T / T
  • مصنوعات کی تفصیل

    پروڈکٹ ٹیگز

    The Fabric Vertical Burn Tester measures the limited flame spread properties of vertically

    oriented textile fabrics and industrial products in the form of a single or multi component

    fabrics, when subjected to a small defined flame. A textile is held vertically in a frame.

    A small flame is used to ignite the specimen and the time is measured for the flame to

    spread up the specimen, as well as after-flame time and afterglow time. This method is not.

     

    The instrument operates by applying a defined flame for 10 seconds to the surface or the

    bottom of the test specimen. Results are then recorded on the after-flame time, afterglow

    time, formation of debris, flaming debris or a hole in the test specimen.

    The Gas Burner is designed to allow several different positioning, dependent on the angle

    of test required. Face test, Bottom-edge ignition, horizontal stand-by position, horizontal

    reach adjustment, and vertical stand-by flame height can all be achieved on the Fabric

    Vertical Burn Tester. Test specimens are cut to size with dimensions 200


  • پچھلا:
  • اگلے:

  • متعلقہ مصنوعات

    WhatsApp Online Chat !