DRK227 Mask fuskan fuska Gwajin Shiga Jini
Takaitaccen Bayani:
Daya.Bayanin Taɓa fuskar launi ta fuskar gwajin shigar jini (wanda ake magana da ita azaman ma'auni da kayan sarrafawa) yana ɗaukar sabon tsarin da aka saka ARM, 800X480 babban nunin launi na taɓawa LCD, amplifiers, masu canza A/D da sauran na'urori suna ɗaukar sabuwar fasaha, tare da haɓaka. madaidaici , Halayen ƙwaƙƙwarar ƙira, ƙirar ƙirar sarrafa microcomputer, aiki mai sauƙi da dacewa, haɓaka ingantaccen gwajin gwaji.Tsayayyen aiki, cikakken f...
Daya.Dubawa
Mai gwada shigar da jini ta fuskar fuska mai launi (wanda ake magana da shi azaman ma'auni da kayan sarrafawa) yana ɗaukar sabon tsarin da aka saka ARM, 800X480 babban nunin launi mai sarrafa LCD, amplifiers, masu canza A/D da sauran na'urori suna ɗaukar sabuwar fasaha, tare da ingantaccen daidaito. , Halayen maɗaukaki masu mahimmanci, ƙaddamar da ƙirar sarrafa microcomputer, aiki mai sauƙi da dacewa, inganta ingantaccen gwajin gwaji.Ayyukan kwanciyar hankali, cikakkun ayyuka, ƙirar tana ɗaukar tsarin kariya da yawa (kariyar software da kariyar kayan aiki), mafi aminci da aminci.
Ana sarrafa matsa lamba ta atomatik, saurin matsa lamba yana da sauri, kuma za'a iya daidaita matsa lamba ta atomatik bayan an saita matsa lamba, kuma daidaiton sarrafa matsa lamba yana da girma.
Saitin matsa lamba yana da aikin saitin mataki, wanda ya dace da saitin matsa lamba.
Ana iya daidaita nuni na dijital na matsin lamba da lokacin allura daidai daidai da ainihin yanayi.
Dukansu matsa lamba da lokacin fesa ana iya haddace su ta atomatik, kuma ana iya tuno su kai tsaye a gwaji na gaba, wanda ke inganta ingantaccen gwajin.
Saita 0.5S da 1.5S maɓallan fesa daban don sauƙin daidaitawa.
Biyu.Babban sigogi na fasaha
1.
| Abun siga | Manuniya na fasaha |
| Kewayon matsin lamba | 8-25kPa |
| Daidaitaccen matsi | ± 0.1 kPa |
| Fesa nisa | 300± 10mm |
| Girman jet | Ø0.84mm |
| LCD nuni rayuwa | Kimanin awanni 100,000 |
| Yawan ingantaccen allon taɓawa | Kusan sau 50,000 |
2. Akwai nau'ikan gwaji: (1) 10.7kPa
(2) 16.0kPa
(3) 21.3kPa
(4) Custom
3. Ma'auni masu aiki:
GB/T19083,
YY 0469,
YY/T0691,
ISO 22609
Saukewa: ASTM F1862-17
