DRK228 Tufafin kariya na likitanci na roba mai gwajin iya shiga jini na aikin Manual

Tƙayyadaddun ƙayyadaddun bayanai da daidaitawa

1. Kayan aiki yana ɗaukar tushen iska wanda zai iya samar da (0.5 ~ 30 ± 0.1) kPa matsa lamba don ci gaba da matsawa samfurin, wanda ba'a iyakance shi ta wurin wurin gwajin ba;

2. Za'a iya daidaita yanayin yanayin iska da yardar kaina, da kewayon daidaitawa (0.5 ~ 30) kPa;

3. Nunin allon taɓawa mai launi da aiki;

4. Samfurin clamping pad ana sarrafa shi tare da shigo da bayanan martaba na musamman na aluminum, wanda yake da haske a cikin abu, mai tsabta a saman kuma bai taɓa tsatsa ba.

5. Kayan aiki yana ɗaukar nau'in zane na waya na musamman na aluminum wanda aka shigo da shi, sanye take da maɓallan ƙarfe, aiki mai mahimmanci, ba sauƙin lalacewa ba;

6. Na'urar ƙwanƙwasa don samfuran kayan aiki, sanye take da kariyar kullewa, don hana yaduwar jini na roba;

7. Ƙarfin maƙarƙashiya daidai ne kuma abin dogara;

8. Tankin gwajin yana sanye da na'urar sanyawa na musamman, wanda ya dace da abokan ciniki suyi aiki;

9. Ana sarrafa tankin gwaji tare da bakin karfe na musamman na 316, kuma saman yana sanye da murfin na musamman don babban kariya ta gaskiya;

10. Mai wanki da ke ƙasa da samfurin an yi shi da kayan PTFE mai inganci bayan aiki na musamman;

11. Square karfe block net: bude sarari ≥50%; Lankwasawa ≤5mm a 30kPa;

12. Daidaitaccen sarrafa lokacin kayan aiki ≤01 seconds;

13. An yi harsashin kayan aiki da fenti mai kyau na ƙarfe, wanda yake da kyau da kyauta.

14.Equipped tare da firintar dubawa, haɗa zuwa firinta na iya buga rahotannin bayanai kai tsaye.

Sigar fasaha:

1. Girman samfurin: 75mm × 75mm

2. Wurin gwaji: 28.26 murabba'in santimita

3. Matsakaicin daidaitawar iska (0.5 ~ 30) kPa

4. Girman waje: 500mm × 500mm × 500mm (L × W × H)

5. Nauyin kayan aiki: 40 kg

6. Wutar lantarki: AC220V, 50Hz,

Iyakar wadata: 1. Babban injin guda ɗaya;2.PTFE gaskets guda biyu; 3.Wanke gari guda biyu;4.Ƙarfe ɗaya mai toshe net;

7. Saitin kayan aikin kullewa na musamman;6.Ɗayan famfo mai inganci mara inganci, [bayanin kula: ba a haɗa lasisin samar da aminci ba].7.Sanye take da na'urar bugawa;8.Samfuri ɗaya;9.Takaddun samfur ɗaya;10.Kwafi ɗaya na jagorar aikin samfur.

Umarnin aiki:

Saka bututun fitarwa na iska a cikin mai da mai raba ruwa na kayan aiki kamar yadda ake buƙata (matsa lamba 0.1-0.3mpa).

Bayan kun kunna wutar lantarki, ana nuna alamar farawa (sunan na'urar).Danna maballin "ENTER" don SHIGA gwajin gwajin, kamar yadda aka nuna a cikin adadi mai zuwa:

Danna maɓallin "setting".,shiga allon saitin sigogi, kamar yadda ke ƙasa

Wannan allon zai iya saita lokacin tsarin, kwanan wata da lokacin gwaji, bayan saita, danna maɓallin "ajiye" don adana bayanan saitin.