DRK6003B Gwajin Zafin Jiki na safar hannu

Amfani da kayan aiki:

Yi amfani da wani abu mai zafi don taɓa safar hannu kai tsaye don kwatanta yanayin zafin hannun ɗan adam a cikin safar hannu a cikin wani ɗan lokaci kaɗan, kuma da gaske a gwada ma'auni masu dacewa na aikin safofin hannu na thermal.

Ma'auni masu dacewa:

BSEN702-1995 (R2007), ISO12127-1-2007

Halayen kayan aiki:

1. Babban nunin allon taɓawa, ƙirar ƙirar ƙirar mai amfani da sauƙin aiki.

2. Akwai nunin lokacin gwaji yayin gwajin, wanda ya dace don daidaita lokacin gwaji.

3. An yi panel ɗin da kayan aluminum na musamman da maɓallan ƙarfe, waɗanda ke da mahimmanci ga aiki kuma ba sauƙin lalacewa ba.

4. Mahimman abubuwan sarrafawa sune 32-bit Multi-function motherboards daga STMicroelectronics.

5. High quality-servo motor da servo controller drive, daidai gudun iko.

6. Kayan aiki ya ƙunshi musaya na Sinanci da Ingilishi don sauƙaƙe duba abokan ciniki na kasashen waje.

7. The surface spraying na kayan aiki rungumi dabi'ar high quality electrostatic spraying fasahar.

8. Kayan aiki yana sanye da na'urar gano matakin daidai.

9. An tsara kayan aiki azaman kwamfutar tebur tare da aikin barga da ƙananan amo.

10. 16-bit high-madaidaicin zafin jiki saye AD guntu.

11. Kwamfuta ta kan layi tana nuna ta atomatik.

12. Samar da rahotannin gwaji ta atomatik.

13. Dumama Silinda saki: danna samfurin karkashin free nauyi.

14. Dumama Silinda komawa: atomatik dawowa.

15. Kwamitin kariya na thermal: motsi ta atomatik.

16. Kwamitin kariya na zafi: dawowa ta atomatik.

17. Yi amfani da na'urori masu auna firikwensin omega da masu watsawa.

Ma'aunin fasaha:

1. Matsakaicin gwajin calorimeter shine 25mm ± 0.02;

2. Zazzabi kewayon: dakin zafin jiki +5 ℃-500 ℃;

3. Daidaitaccen zafin jiki: ± 0.5 ℃;

4. Matsakaicin zafin jiki shine 0.1 ℃;

5. Ƙarfin da aka yi amfani da shi na silinda mai dumama: 49 ± 0.5N;

6. Mahimmin ganewa na firikwensin silinda mai zafi, nisa daga kasan gwajin: 3mm ± 0.05mm;

7. Saki gudun dumama Silinda 5mm / s (gudun daidaitacce 1-10mm / s);

8. Saurin dawowa na silinda mai dumama shine 5mm / s (gudun daidaitacce 1-10mm / s);

9. Nisa tsakanin dumama Silinda da samfurin samfurin: 150mm ± 0.5mm;

10. Jirgin kariyar polyethylene: 20 * 240 * 250mm;

11. Nisa tsakanin farantin kariya na polyethylene da saman saman samfurin: 100mm;

12. Gudun motsi na allon kariya na polyethylene: 80mm / s

13. Tsawon ma'aunin lokaci: 0-99999.9S

14. Wutar lantarki: AC220V, 50Hz

15. Girma: 640×520×780mm (L×W×H)

16. Jimlar nauyi: 80kg;