DRK3025A Sponge Indentation Hardness Tester ISO2439

Tšebeliso ea lisebelisoa:

Sesebelisoa sena ke mohlala oa boemo bo phahameng bo nang le tlhophiso e phahameng, mesebetsi e feletseng, ho nepahala ho phahameng, ts'ebetso e tsitsitseng le e ka tšeptjoang indastering ea malapeng.E sebelisoa haholo ho leka ho thatafala ha compression indentation le karo-karolelano ea lisebelisoa tse nang le porous tse kang seponche le foam.

E lumellana le maemo:

GB/T10807-2006, ISO2439, ITTC1.1 teko ea boima, ITTC1.2 indentation ratio le litekanyetso tse ling.

Likaroloana:

1. Adopt servo driver le motor (taolo ea vector).

2. Li-screws tsa bolo tse khethiloeng le liporo tse nepahetseng tsa tataiso.

3. E na le li-sensor tse phahameng tse nepahetseng, ST series 32-bit single-chip microcomputers ho tloha ho STMicroelectronics, le li-converter tsa 24-bit A / D.

4. E na le ts'ebetso e kholo ea skrine ea ho ama 'mala.

5. Software ea inthaneteng e tšehetsa sistimi ea ts'ebetso ea lifensetere,

6. Digital setting ya software pre-tension.

7. Boemo ba digital ba bolelele ba gauge, boemo bo itekanetseng.

8. Tšireletso e tloaelehileng: ts'ireletso ea mechine e sireletsang, ho tsamaea ka holimo le ka tlaase ho moeli, tšireletso e feteletseng, tšireletso e ikemetseng bakeng sa overvoltage, overcurrent, overheating, undervoltage, undercurrent, leakage, le tšireletso ea letsoho bakeng sa li-switches tsa tšohanyetso.

9. Qobella ho lekanya: tekanyo ea khoutu ea dijithale (khoutu ea tumello) ho thusa ho netefatsa lisebelisoa le ho laola ho nepahala.

Mosebetsi oa software:

1. Software e tšehetsa mokhoa oa ho sebetsa oa lifensetere, o loketseng haholo ebile ha o hloke koetliso ea litsebi.

2. Software ea inthaneteng ea komporo e tšehetsa tšebetso ea Sechaena le Senyesemane.

3. Lenaneo la teko le tiisitsoeng ke mosebedisi le phekoloa, 'me litekanyetso tsohle li behiloe ka litekanyetso tsa kamehla, tse ka fetoloang ke mosebedisi.

4. Sebopeho sa litlhophiso tsa parameter: li-parameter tse kang nomoro ea lisebelisoa tsa mohlala, 'mala, batch, nomoro ea sampuli, joalo-joalo kaofela li behiloe ka boikemelo le ho hatisoa kapa ho bolokoa.

5. Mosebetsi oa ho atametsa le ho tsoa libakeng tse khethiloeng tsa lekhalo la teko.Tobetsa ntlha efe kapa efe ea teko ho bonts'a boleng ba matla le boleng ba elongation.

6. Tlaleho ea data ea liteko e ka fetoloa EXCEL, lentsoe, joalo-joalo, 'me liphetho tsa liteko li ka hlahlojoa ka bo eona ho tsamaisa khokahano le software ea tsamaiso ea khoebo ea moreki.

7. Lekhalo la teko le bolokoa ho PC bakeng sa rekoto le potso.

8. Software ea tlhahlobo e kenyelletsa mekhoa e fapaneng ea tlhahlobo ea matla a thepa ho etsa hore tlhahlobo e be bonolo haholoanyane, e potlake, e nepahale ebile e theko e tlase.

9. Nakong ea tlhahlobo, karolo e khethiloeng ea lekhalo e ka atometsoa ka ntle le ka ntle ka ntle ho mabaka.

10. Lekhalo la sampuli e lekiloeng le ka bontšoa tlalehong e tšoanang le sephetho sa tlhahlobo.

11. Ts'ebetso ea lintlha tsa lipalo-palo, ke hore, ho bala lintlha ka sekhahla se lekantsoeng, ho ka fanoa ka kakaretso ea lihlopha tsa 20 tsa data, 'me tekanyo e lekanang kapa ea matla e ka fumanoa ho ea ka matla a fapaneng kapa ho kenya letsoho ka matla. mosebedisi.

12. Multi-curve superposition mosebetsi.

13. Sehlopha sa teko se ka fetoloa ka mokhoa o ikemetseng, joalo ka Newton, Pound Sterling, Kilogram Force joalo-joalo.

14. Theknoloji e ikhethang (moamoheli, komporo) ea mekhoa e 'meli ea taolo, liphetho tse ruileng le tse fapaneng tsa liteko (litlaleho tsa data, li-curve, li-graph, litlaleho.

Tekheniki parameter:

1. Range le boleng ba karohano: 2500N, 0.1N;

2. Qeto ea boleng ba matla ke 1/60000;

3. Ho nepahala ha sele ea mojaro: ≤± 0.05% F · S;

4. Ho nepahala ha mojaro oa mochine oohle: 2%～100% ea tekanyo e feletseng, ho nepahala ha ntlha leha e le efe ≤± 0.1%, kereiti: 1;

5. Lebelo la ho fetola lebelo la leballo (ho nyoloha, ho theoha, taolo ea lebelo, lebelo le tsitsitseng): (1～200) mm / min (e behiloeng ka bolokolohi ka har'a moeli);

6. Leqeba le atlehang: 200mm;

7. Qeto ea ho falla: 0.01mm;

8. Mokhoa oa ho beha sebaka sa clamping: boemo ba dijithale, boemo ba othomathiki;

9. Letlapa la khatello e ka holimo: bophara ba 200mm, radius e pota-potileng ea moeli o ka tlase ke 1mm;

10. Sethala se ka tlaase: 850mm×850mm, bophara ba moea ke 6mm, sebaka sa 20mm;

11. Phetoho ea yuniti: N, lb, kgf;

12. Bokhoni ba ho boloka boitsebiso (karolo e kholo ea yuniti): ≥2000 lihlopha;

13. Matla a matla: 220V, 50HZ, 700W;

14. Litekanyo tsa ka ntle: 800 × 600 × 1600mm (L × W × H);

15. Boima: 100kg