2020 mask market analysis and forecast
As the global epidemic continues to spread and upgrade, masks have developed into a global “hard currency”, and the demand for masks has grown in a blowout. Despite the surge in global demand, it is difficult to quickly expand the production capacity of masks. Among them, the melt-spray-cloth, which is called the “heart” of masks, is in short supply. The price of raw materials has soared more than 20 times in 2 months, resulting in limited production capacity of masks; The factory was shut down due to “melt-spray-cloth scarcity” and cost pressures. Global masks are urgent, the epidemic situation in overseas countries is still spreading, and it is still unknown when to win this war against human epidemic.
From the perspective of the industrial chain, the overall industrial chain of the mask industry is not complicated. The upstream is mainly the raw materials and production equipment for the production of masks, the midstream is the manufacture of various masks, and the downstream is the circulation of pharmacies and hospitals. In the early stage of the epidemic, manufacturing was the main bottleneck due to labor shortage. With the increase in output, there was a shortage of raw materials. With the efforts of upstream petrochemical companies such as Sinopec, related production equipment became the main bottleneck.
Judging from the output value of the mask industry, the output value of the mask industry in mainland China has broken 10 billion yuan in 2019. Affected by the coronary pneumonia epidemic in 2020, the growth rate of the output value of medical masks will be significantly increased (the growth rate is expected to reach 28%), which will drive the growth of the output value of the entire industry.
A few days ago, the high-level meeting held emphasized the strengthening of the “six guarantees” work, which specifically proposed the stability of the supply chain of the industrial chain. At present, economic development is facing great challenges, and ensuring the supply chain of the industrial chain, to a large extent, means ensuring the production of enterprises and stabilizing Chinese manufacturing. So what does the “six guarantees” guarantee? Consumer exports including masks, life-saving medicines, mobile phones, and automobiles are related to national economy and people’s livelihood.At present, masks are basically non-woven fabrics. mask fabrics are composed of spun-bonded non-woven fabrics and melt-blown non-woven fabrics produced from polypropylene. They usually have three layers. Melt-blown-cloth is the middle layer. The ultrafine fiber with static electricity, in addition to blocking the larger dust particles, can also attract fine dust, bacteria and viruses through the static charge on the surface. It has strong filtering, shielding and thermal insulation properties and can play a sterilizing role. To isolate the role of viruses, melt-spray-cloth can be said to be the “heart” of a medical mask.
According to statistics from the China Industrial Textile Industry Association, China is the world’s largest producer of nonwoven fabrics. In 2018, the production of non-woven fabrics was about 5.94 million tons, but the output of melt-blown non-woven fabrics was very low. The annual production capacity was 53,500 tons, accounting for 1% of the production capacity of non-woven fabrics. , Battery separators and other products. At present, the demand for medical masks is still relatively strong, and it is expected that the output of non-woven fabrics will reach 6.76 million tons in 2020.
Drick masks, anti-protection-clothing complete set of testing instruments
Shandong Drick Instruments is equipped with these mask detection instruments and established corresponding laboratories: particulate filtration efficiency tester, bacterial filtration efficiency tester, respiratory resistance tester, synthetic blood penetration tester, ventilation resistance and gas exchange pressure difference tester , Comprehensive tensile testing machine, visual field tester, formaldehyde detector, color fastness tester, ethylene oxide residue detection chromatograph, microorganism detection equipment, etc.
Testing standards, corresponding testing instruments
YY 0469-2011
Specific test items Corresponding testing equipment
4.4 Breaking strength of connection point DRK101 comprehensive tensile testing machine
4.5 Synthetic blood penetration DRK227 synthetic blood penetration detector
4.6.1 Bacterial over-rate efficiency (BFE) DRK1000 bacterial over-rate efficiency tester
4.6.2 Particle over-rate efficiency (PFE) DRK506 particle over-rate efficiency tester
4.7 Pressure difference DRK260 respiratory resistance tester
4.8 Flame retardant performance DRK-07B flame retardant performance tester
4.10 Residue of ethylene oxide
YY/T 0969-2013
Specific test items Corresponding testing equipment
4.4 Breaking strength of connection point DRK101 comprehensive tensile testing machine
4.5 Bacterial over-rate efficiency (BFE) (YY 0469) DRK1000 bacterial over-rate efficiency tester
4.6 Ventilation resistance DRK709 pressure difference tester
4.8 Residue of ethylene oxide DRK GC1690 gas phase + headspace
GB 19083-2010
Specific test items Corresponding testing equipment
4.3 Breaking strength of the joint DRK101 comprehensive tensile testing machine
4.4 Filtration efficiency (over-efficiency of non-oily particles) DRK506 particle over-rate efficiency tester
4.5 Airflow resistance DRK260 respiratory resistance tester
4.6-Synthetic blood penetration DRK227 synthetic blood penetration detector
4.7 Surface moisture resistance DRK308A type fabric surface water wetting tester
4.9 Residue of ethylene oxide
4.10 Flame retardant performance DRK-07B flame retardant performance tester
4.12 adhesion
5.3.2 Temperature pretreatment, DRK250 constant temperature and humidity test chamber
GB/T 32610-2016
Specific test items Corresponding testing equipment
5.3 Color fastness to rubbing (dry/wet)/level DRK128C rubbing color fastness testing machine
5.3 Formaldehyde content Textile Formaldehyde Tester
5.3 PH value PH meter
5.3 Residue of ethylene oxide
5.3 Expiratory resistance, inspiratory resistance DRK260 respiratory resistance tester
5.3 Breaking strength DRK101 comprehensive tensile testing machine
5.3 Exhalation valve cover fastness
5.4 Filtration efficiency (ability to filter out particulate matter) DRK506 particle over-rate efficiency tester
5.5 Protection effect (ability to block particles)
Appendix A, 3 samples and pretreatment (high temperature, low temperature, damp heat)
DRK250 constant temperature and humidity test chamber
GB 2626-2006 Respiratory protective equipment Self-priming filter type anti-particulate respirator
Specific test items Corresponding testing equipment
5.3 Filtration efficiency N-type particles, P-type oil particles DRK506 particle over-rate efficiency tester
5.4 Leakage
5.5 Respiration resistance DRK260 respiratory resistance tester
5.6.1 Air tightness of exhalation valve DRK134 breathing valve air tightness tester
5.6.2 Axial tension of the exhalation valve cover DRK101 comprehensive tensile testing machine
5.7 Dead space Dead space test instrument
5.8 Vision DRK262 visual field measuring instrument
5.9 The headband should bear the pulling force DRK101 comprehensive tensile testing machine
5.10 Connection and connecting parts withstand axial tension
5.12 Airtightness DRK134 breathing valve air tightness tester
5.13 Flammability DRK-07B flame retardant performance tester
6.2 Temperature and humidity pretreatment DRK250 constant temperature and humidity test chamber
Send your message to us:
Post time: Jun-05-2020