DRK310 Mai Jarabawar Haɓakar Gas- Hanyar Matsi Bambance (Gida ɗaya)
Takaitaccen Bayani:
Samfuran gwajin iya jurewa iskar gas.Dace da O2, CO2, N2 da sauran marasa guba gas permeability gwajin na filastik fim, hada fim, babban shãmaki abu, takardar, karfe tsare, roba da sauran kayan Kayayyakin Ka'ida 1.Differential matsa lamba Hanyar Sanya da pre-sa samfurin tsakanin ɗakin daɗaɗɗen matsi da ɗakin ƙananan matsa lamba, damfara da hatimi, sa'an nan kuma zubar da ɗakunan maɗaukaki da ƙananan matsa lamba a lokaci guda;bayan vacuuming na wani lokaci da kuma injin datsa ...
Kayayyaki
Gwajin iskar gas.
Dace da O2, CO2, N2 da sauran marasa guba gas permeability gwajin na filastik fim, hada fim, babban shãmaki abu, sheet, karfe tsare, roba da sauran kayan.
Ka'idar Kayan aiki
1.Matsin bambanci hanya
Sanya samfurin da aka riga aka saita a tsakanin ɗakin daɗaɗɗen maɗaukaki da ƙananan ɗakuna, damfara da hatimi, sa'an nan kuma zubar da ɗakuna masu tsayi da ƙananan a lokaci guda;bayan shafewa na wani lokaci kuma digiri na vacuum ya sauke zuwa ƙimar da ake buƙata, rufe ɗakin daɗaɗɗen matsa lamba kuma matsa zuwa babban matsi Cika ɗakin tare da gas na gwaji kuma daidaita matsa lamba na babban matsi don kula da bambancin matsa lamba a bangarorin biyu na samfurin;iskar gas ta shiga daga babban matsi na samfurin zuwa ga ƙananan ƙananan ƙananan aiki a ƙarƙashin aikin bambancin matsa lamba;daidai auna canjin matsa lamba a cikin ɗakin ƙananan matsa lamba kuma ƙididdige sigogin aikin iskar gas na samfurin.
2.Matsayi m
YBB 00082003, GB/T 1038, ASTM D1434, ISO 2556, ISO 15105-1, JIS K7126-A.
3.Na fasaha halaye
Ana shigo da na'urori masu inganci masu inganci da na'urori masu auna matsa lamba, tare da ingantaccen gwaji;
Semiconductor sanyi da zafi bidirectional zafin jiki kula, a layi daya nau'i, high aminci;
Matsakaicin sassan bututun bawul, cikakken rufewa, injin mai sauri mai sauri, rarrabuwa sosai, rage kurakuran gwaji;
Samfurin ƙirar rigakafin zubar da ciki, rage ɗigon shigar samfurin;
Matsakaicin madaidaicin iko don kula da bambance-bambancen matsa lamba tsakanin ɗakuna masu girma da ƙananan matsa lamba a cikin kewayo mai yawa;
Ƙwararren fasaha na asali don cire tsarin baya na tsarin da kuma rage kurakuran gwaji;
Mai hankali ta atomatik: ƙarfin gwajin kai, don guje wa gazawar ci gaba da gwaji;maballin daya fara cikakken aiwatar da gwajin ta atomatik.
Rikodin bayanai: Zane, cikakken tsari da cikakken rikodin abubuwa, bayanai ba za su rasa ba bayan gazawar wutar lantarki.
Tsaron bayanai: Tsarin software na zaɓi na "GMP Computerized System", tare da sarrafa mai amfani, sarrafa iko, hanyar duba bayanai da sauran ayyuka.
Yanayin aiki: na cikin gida.Babu buƙatar yanayin zafin jiki da zafi akai-akai (rage farashin amfani), kuma bayanan gwajin ba su shafi yanayin yanayi da zafi ba.
Siga
| Abu | Siga | Abu | Siga |
| Kuskuren gwadawa | 0.01cm3/m2• kwana •0.1MPa | Daidaitawahanya | Tsaya fim |
| Kuskuren ɓarna | 0.1Pa | Wurin Wuta | 1333.33 Pa |
| Vacuum | <10 ba | Vacuuminganci | kasa da 27Pa a cikin 20mintuna |
| Yanayin zafin jiki | 15 ℃ ~ 50 ℃ | Zazzabikuskuren sarrafawa | ± 0.1 ℃ |
| Misalikauri | ≤3mm | Wurin gwaji | 50cm2 (Da'ira) |
| Gwajin iska | O2, N2, CO2 da iskar gas mara guba | Gwaji matsa lamba | 0.1 zuwa 0.2 MPa |
| Gas dubawa | 1/8” | Matsin iska | 0.1 zuwa 0.8 MPa |
| Tushen wutan lantarki | AC220V 50Hz | Ƙarfi | <1500 W |
| Samfura | DRK310 | ||
| Gwajin gwaji | 0.1-50,000 | ||
| Yawan samfurin | 1 | ||
| Adadininjin firikwensin | 1 | ||
| Hanyar gwaji | Zaure ɗaya | ||
| Girman mai masaukin baki | 585×640×380mm(L/W/H) | ||
| Nauyin mai masaukin baki | 50Kg | ||
Daidaitaccen tsari
Mai watsa shiri, injin famfo, software na gwaji, samfurin samfurin, kwamfutar DELL (babu BSG-11), ƙwanƙolin ƙura, matsa lamba gas na silinda yana rage bawul da kayan aikin bututu, man shafawa, nunin inch 21.5 DELL, kuma an gina rundunar a cikin rundunar gwajin. .
Na'urorin haɗi na zaɓi:na'urar gwajin kwantena, sashin kula da zafi.
Abubuwan da aka samar da kai:gwada gas da silinda
