DRK310 Mai Gwajin Gas ɗin Gas- Hanyar Matsala Bambance (matsakaicin ƙimar ɗakuna uku)
Takaitaccen Bayani:
Intruction iskar gas gwajin.Ya dace da gwajin permeability na O2, CO2, N2 da sauran iskar gas a cikin fina-finai na filastik, fina-finai masu hade, manyan kayan shinge, zanen gado, foils na karfe, roba da sauran kayan.Yana iya gano iskar gas mai guba.Ka'idodin kayan aiki Hanyar matsa lamba: Sanya samfurin da aka riga aka saita a tsakanin ɗakin daɗaɗɗen matsa lamba da ƙananan ɗakuna, damfara da hatimi, sa'an nan kuma zubar da ɗakunan maɗaukaki da ƙananan matsa lamba a lokaci guda;Bayan fitar da takardar shedar...
Intruction
Gwajin iskar gas.
Ya dace da gwajin permeability na O2, CO2, N2 da sauran iskar gas a cikin fina-finai na filastik, fina-finai masu hade, manyan kayan shinge, zanen gado, foils na karfe, roba da sauran kayan.Yana iya gano iskar gas mai guba.
Ka'idar kayan aiki
Hanyar matsa lamba daban-daban:
Sanya samfurin da aka riga aka saita a tsakanin ɗakin daɗaɗɗen maɗaukaki da ƙananan ɗakuna, damfara da hatimi, sa'an nan kuma zubar da ɗakuna masu tsayi da ƙananan a lokaci guda;Bayan kwashewa na ɗan lokaci kuma digiri na vacuum ya ragu zuwa ƙimar da ake buƙata, rufe ɗakin da ba a so ba, cika ɗakin daɗaɗɗa tare da gas ɗin gwaji, da daidaita matsa lamba a cikin ɗakin daɗaɗɗa don kula da kullun. Bambanci na matsa lamba a bangarorin biyu na samfurin; Gas yana ratsawa daga babban matsin lamba zuwa ƙananan matsa lamba na samfurin a ƙarƙashin aikin bambancin matsa lamba;canjin matsa lamba a cikin ƙananan ƙananan ɗakin yana auna daidai, kuma ana ƙididdige ma'auni na iskar gas na samfurin.
Matsayin gudanarwa
YBB 00082003, GB/T 1038, ASTM D1434, ISO 2556, ISO 15105-1, JIS K7126-A.
Siffofin fasaha
Ana shigo da na'urori masu inganci masu inganci da na'urori masu auna matsa lamba, tare da ingantaccen gwaji;
Semiconductor sanyi da zafi bidirectional zafin jiki kula, a layi daya nau'i, high aminci;
Fasahar aunawa mai ƙarfi mai ƙarfi, kawar da shigarwar samfuri da yoyon baya na tsarin, gwaji mai madaidaici;
Na'urar fitar da iskar gas mai guba don guje wa zubar da iskar gas ɗin gwaji da ƙarancin iskar gas;
Madaidaicin bawul da sassan bututu, cikar rufewa, injin mai sauri mai sauri, ɓarke na gaske, rage kurakuran gwaji;
Madaidaicin kulawar matsa lamba don kula da bambancin matsa lamba tsakanin ɗakuna masu girma da ƙananan matsa lamba a cikin kewayo mai yawa;
Mai hankali ta atomatik: ƙarfin gwajin kai, don guje wa gazawar jihar don ci gaba da gwajin;farawa maɓalli ɗaya, aiwatar da gwajin atomatik;
Rikodin bayanai: Zane, cikakken tsari, cikakken rikodi, da bayanai ba a ɓacewa lokacin da aka kashe wuta.
Tsaron bayanai: na zaɓi “tsarin kwamfuta na GMP” na zaɓi na software, tare da sarrafa mai amfani, sarrafa iko, hanyar duba bayanai da sauran ayyuka.
Yanayin aiki: na cikin gida.Babu buƙatar yanayin zafin jiki da zafi akai-akai (rage farashin amfani), kuma bayanan gwajin ba su shafi yanayin yanayi da zafi ba.
Parameter
| Abu |
Siga | Abu |
Siga |
| Gwaji Range | 0.005-10,000 cm3/m2• kwana •0.1MPa | Kuskuren Auna | 0.005 cm3/m2• rana•0.1MPa |
| Yawan Samfur | 3 | Vacuum Sensors Quantity | 3 |
| Kuskuren Vacuum | 0.01 Pa | Wurin Wuta | 133.3 Pa |
| Vacuum | <10 ba | Ingantaccen Vacuum | ≤10min,≤27Pa |
| Zazzabi | 15 ℃～50 ℃ | Kuskuren Kula da Zazzabi | ± 0.1 ℃ |
| Misali Kauri | ≤3 mm | Wurin Gwaji | 38.48 cm2 (da'ira) |
| Hanyar Gyara | Daidaitawa |
|
|
| Gwajin Gas | O2, N2 da dai sauransu, da iskar gas mai guba | Gwajin Matsi | 0.005 ~ 0.15 MPa |
| Gas Interface | 1/8” | Hawan iska | 0.1 zuwa 0.8 MPa |
| Tushen wutan lantarki | AC220V 50Hz | Ƙarfi | <1500 W |
| Girman mai masaukin baki (L×B×H) | 720×415×400mm | Mai watsa shiri Wet.
| 60Kg |
Daidaitaccen tsari
Mai watsa shiri na gwaji, injin famfo, software na gwaji, ƙwanƙolin ƙura, matsa lamba gas Silinda rage bawul da kayan aikin bututu, samfuri, man shafawa, nunin 21.5 DELL, rundunar da aka gina a cikin rundunar gwajin.
Sassan zaɓi: na'urar gwajin kwantena, sashin kula da zafi.
Abubuwan da aka shirya da kansu: gwajin gas da silinda gas.
