DRK311-2 Infrared Water Vapour Transmission Rate Tester
Short Description:
DRK311-2 Infrared Water Vapour Transmission Rate Tester Function Use to test the water vapour transmission performance, water vapour transmission rate, transmission amount, transmission coefficient of plastic, textile, leather, metal and other materials, film, sheet, plate, container etc. Working Principle Wavelength-modulated laser infrared trace water sensor (TDLAS). Nitrogen of a certain humidity is flowing on one side of the material, and dry nitrogen (carrier gas) is flowing at a ...
DRK311-2 Infrared Water Vapour Transmission Rate Tester Detail:
DRK311-2 Infrared Water Vapour Transmission Rate Tester
Function
Use to test the water vapour transmission performance, water vapour transmission rate, transmission amount, transmission coefficient of plastic, textile, leather, metal and other materials, film, sheet, plate, container etc.
Working Principle
Wavelength-modulated laser infrared trace water sensor (TDLAS).
Nitrogen of a certain humidity is flowing on one side of the material, and dry nitrogen (carrier gas) is flowing at a fixed flow rate on the other side; the difference in humidity between the two sides of the sample drives water vapour to permeate from the high humidity side to the low humidity side of the sample; the permeated water vapour is carried by the flowing dry nitrogen (carrier gas) to the infrared sensor; the sensor measures the water vapour concentration of the carrier gas; and, based on the water vapour concentration of the carrier gas, calculates water vapour permeability and other parameters for the specimen’s parameters.
Standards that comply with
Chinese Pharmacopoeia (four parts) – water vapour transmission rate method, YBB 00092003, GB/T 26253, ASTM F1249, ISO 15106-2, TAPPI T557, JIS K7129.
Product Features:
1.Wavelength-modulated laser infrared microwater sensor, ultra-long range (20 metres) absorption, high accuracy.
2.Decay auto-compensation: no need for periodic re-calibration, no continuous data decay.
3.Humidity control: 10%~95%RH , 100%RH, fully automatic, no fog.
4.Temperature Control: Semiconductor hot and cold two-way control, high precision, stable and reliable.
5.Super environment adaptation: indoor environment, temperature 10 ℃ – 30 ℃ , no humidity requirements, low cost of use.
6.Sample anti side leakage sealing installation technology.
7.Fully automatic: one-key start, the whole process of intelligent; power failure data preservation; boot fault self-detection, to avoid fault state testing.
8. Software: graphical, whole process, full element monitoring; multiple report formats.
Technical parameter
|
Name |
parameter | name | parameter |
|
Humidity range |
0% RH，10%~95%RH，100%RH |
Wet control accuracy |
±1% RH |
|
Temperature range |
15℃~50℃ |
Temperature control accuracy |
±0. 1℃ |
|
Specimen Thickness |
<3 mm |
Working environment |
Inner room：10℃~30 ℃ |
|
Carrier gas type |
99.999% high purity nitrogen |
Carrier gas flow |
0~200 cm3/min |
|
Working air pressure |
0. 1~0.2 MPa |
Interface size |
1/8 inch metal pipe |
|
Power source |
AC 220V 50Hz |
Wattage |
＜1.5KW |
|
Number of specimens |
1 | ||
|
Specimen area(cm2) |
50 | ||
|
Membrane test range |
0.05~40 | ||
|
(g/m2.24h) |
0.005 | ||
|
Membrane test resolution |
0.00005~0.5 | ||
|
(g/m2.24h) |
415(L)×720(W)×400 (H) | ||
|
Vessel test range (g/pkg.24h) |
53 | ||
System configuration:
mainframe, test computer, professional test software, Agilent water trap, sampler, nitrogen bottle pressure reducing valve, sealing grease.
Optional parts: container test kit, container temperature control test kit.
Spare parts: high-purity nitrogen, distilled water.
Product detail pictures:
Related Product Guide:
Points To Consider While Choosing Lab Testing Machines for Your Industrial Laboratory
What Are Impact Test Machines?
The key to our success is "Good Product or service High quality, Reasonable Rate and Efficient Service" for DRK311-2 Infrared Water Vapour Transmission Rate Tester, The product will supply to all over the world, such as: US, Yemen, Zimbabwe, In order to meet the increasing requirement of customers both home and aboard, we will keep carrying forward the enterprise spirit of "Quality, Creativity, Efficiency and Credit" and strive to top the current trend and lead fashion. We warmly welcome you to visit our company and make cooperation.
SHANDONG DRICK INSTRUMENTS CO.,LTD
Company Profile
Shandong Drick Instruments Co., Ltd, is mainly engaged in the research and development, manufacturing and sales of testing instruments.
The company established in 2004.
Products are used in scientific research units, quality inspection institutions, universities, packaging, paper, printing, rubber and plastics, chemicals, food, pharmaceuticals, textiles, and other industries.
Drick pays attention to talent cultivation and team building, adhering to the development concept of professionalism, dedication.pragmatism, and innovation.
Adhering to the customer-oriented principle, solve the most urgent and practical needs of customers, and provide first-class solutions to customers with high-quality products and advanced technology.
By Alexia from Nigeria - 2015.12.22 12:52
Good quality, reasonable prices, rich variety and perfect after-sales service, it's nice!
By Jodie from Hanover - 2016.02.28 14:19
