DRK388 Mask Adhesion Test System —Dual Counter Sensor
Short Description:
Application It is used to determine the particle adhesion (fitness) test of the mask. Standards GB19083-2010 Technical Requirements for Medical Protective Masks Appendix B and other standards. Features 1. All stainless steel test room. 2. Using well-known brand high-precision laser counter sensor to ensure accurate, stable, fast and effective sampling. 3. The dust generator adopts Collision multi-nozzle design to ensure rapid and stable adjustment of the fog density. Technical Parameters 1. ...
Application
It is used to determine the particle adhesion (fitness) test of the mask.
Standards
GB19083-2010 Technical Requirements for Medical Protective Masks Appendix B and other standards.
Features
1. All stainless steel test room.
2. Using well-known brand high-precision laser counter sensor to ensure accurate, stable, fast and effective sampling.
3. The dust generator adopts Collision multi-nozzle design to ensure rapid and stable adjustment of the fog density.
Technical Parameters
1. Inspection chamber volume: 2.5m³
2. Inner size of detection chamber (L×W×H): 1000mm×1000mm×2500mm, allow +0.5m3 deviation
3. Fog dust source: NaCl
4. The concentration of NaCl particulate matter: 70×106≥/m³
5. NaCl particulate matter aerodynamics: the median diameter of the mass is about 0.26um;
6. Power requirements: 220V, 50Hz, 2KW
7. Gas source requirements: 0.5MPa, 120L/Min
8. Dimensions: Inspection chamber (L×W×H) 1200mm×1200mm×2600mm
9. Test host (L×W×H): 880mm×520mm×1400mm
Product weight: about 220Kg in the inspection warehouse
Configuration list
1. One host.
2. One inspection warehouse.
3. Two sensors.
4. A salty dust generator.
5. A bottle of sodium chloride.
6. A bag of accessories.
7. A product certificate.
8. A product instruction manual.
9. A delivery note.
10. An acceptance sheet
Optional accessories
Air pump 0.35～0.8MP; 120L/min
