DRK6614 Compression Rebound Instrument SATRA TM 64

Instrument use：

The instrument is used to determine the compressive permanent deformation of a material, determine the shape retaining force and elastic properties of the test. Mainly suitable for solid and microporous sole materials, can also be used for any type of compressible material. Its principle is a predetermined pressure and fixed time compression, and let it recover in a fixed time, you can measure the thickness of the sample change rate.

Conform to the standard：

SATRA TM64:1996-01。

Product features：

The test machine is equipped with 10 middle card disc, each layer can be placed 3 samples, a total of 27 samples can be tested at the same time, greatly improve the efficiency of the test, and reduce the working intensity of the operator, and the machine stroke adjustment range is wide. Compared with the compression springback instrument on the market, the method of calculating force value by spring deformation is adopted, and the measurement accuracy is not high, and the secondary calculation is required, and the operation is tedious. The test instrument adopts the digital force value display mode, which has high precision, good stability and convenient control.

Technical parameters：

1, Transmission mode: hand wheel screw linkage.

2, Force value sensor range: 10kN.

3, Extrusion space stroke: 70 ~ 200mm.

4, Power supply: AC220V 50Hz

Configuration list：

1. 1 host machine

2. One product certificate

3. One copy of product instruction manual

4. One delivery note

5. One receipt of acceptance

6. One product album